Question: How much Polytron Metal Treatment Concentrate (MTC) should I add to my engine?

Answer: For vehicles with a standard five-quart crankcase capacity, add 16 ounces of Polytron MTC to the crankcase. Then fill to the recommended capacity with the motor oil normally used. With larger volume systems, use Polytron MTC 10% by volume.

Question: How often do I add Polytron MTC to my oil ?

Answer: After the initial treatment 16 oz., for maximum results it is recommended that you add 8 oz. of Polytron MTC every 10,000 miles or every 3rd oil change.

Question: Is it necessary to change my oil as often with Polytron MTC ?

Answer: The decision to change oil is yours. Polytron MTC dramatically extends the life span of your oil, however we recommend that you always follow the service interval guidelines provided by the manufacturer of your car or truck. Change oil and filters as recommended.

Question: Will adding Polytron MTC void New Car Warranties?

Answer: No. Polytron is a 100% petroleum based product and contains no Teflon or PTFE resins, molybdenum disulfide, lead or any other solids which can cause serious buildup in your engine. It is undetectable when mixed with the motor oil you regularly use in your vehicle.

Question: Has any major Auto Manufacturer tested Polytron products?

Answer: Not to our knowledge. It is not in the best interest of the auto industry to have your car’s engine last forever without breaking down. There is more money in long-term repairs.

Question: Can I use Polytron in a new car or in a rebuilt engine?

Answer: Yes. The earlier an engine is treated with Polytron, the greater the overall benefit. Unlike most oil additives and engine treatments, Polytron does not interfere with engineered tolerances. It can be used immediately following the manufacturer’s recommended engine break-in period (usually between 500 and 1,000 miles). Please consult your owner’s manual or engine rebuilder for exact specifications.

Question: Why would I want to put Polytron in a brand new vehicle?

Answer: Quite simply - to prevent the new engine in your car from becoming an old engine. Most engine ware occurs during cold starts, in the first critical moments before motor oil fully circulates. Within hours of turning your engine off, virtually no oil remains on the engine parts due to gravity. Polytron Metal Treatment coats surfaces with a layer of ionic oil molecules which dramatically reduces friction and wear. Immediate start-up lubrication is assured.

Question: How quickly can I expect results from Polytron products?

Answer: For the majority of cars the results are immediate. In other cars it may take several hundred miles or several gas treatments to notice any dramatic change due to the buildup of gum, varnish and other solids prior to installing Polytron products.